yuyan中文

Faq >>

Installation Help >>

Website Feedback >>

Questions? Email Us!

Contacts Us

Installation Help

    Installation instruction of the cabinet with leg

  • Put up and Handle with care

    Enjoin from stepping.
  • 1.Pls take care of loading ,all the products must be layed under the instruction,as showing in the picture

  • Accessories of the facet
  • 2.Pls send water facet,drainer and other accessories to customer in time.

  • In order to protect the cabinet,
    pls lay some foam on the floor
  • 3.In order to protect the cabinet ,pls lay some foam on the floor,and place the wrapper at the appointed place after opening the carton.

  • Drilling

    Put the tumefacient screw
    into the wall                      

  • Adhere the cabinet to the wall with screw
  • 4.Be sure all the holes are right , drill holes in the wall with 8mm electric drill first ,then put the tumefacient screw into the wall ,and then intall the cabinet by 6*6.5 screw.

  • Put on the silica gel

    Press the basin

    Be sure that the cabinet and 
    basin connected well          
  • 5.Put some silica gel on the side and back panel of the cabinet in uniformity,then fix the basin onto the cabinet,with heavy press on it ,so the cabinet and basin can be connected well.

  • Distinguish the cold and hot
    water pipe                           
  • 6.Connect the cold and hot water pipe up to triangle clique,be care of the position of this two water pipe and airproof ring,connect the drainer and downcomer.First,openi infall clique, and water faucet,close drainer switch to check that whether the basin is good or not.Second,colse the faucet,open the drainer switch to check that whether the basin is good or not.

  • Shelf and side panel

    Bottom panel and side panel

     

     
  • 7.Put silica gel on the bottom panel ,shelf ,side panel and division panel ,so that to aviod the damage of the cabinet.
    At last ,put silica gel on between the side panel and wall ,basin and wall

  • Confirm the height of the
    mirror cabinet                

          Confirm the hole
  • 8.Confirm about the height of the mirror cabinet according to the height of the faucet. 
    Drill the hole on the wall with 8mm drilling machine,then put the tumefacient screw into the wall , at last ,connect it onto the wall ,be sure that there must be 1cm interspace to hanging the mirror
  • 9.Press the mirror after hanging it to make sure that the mirror fixed well.
    Check the insulation of the electrical wire,then connect the electrical wire to the mirror,then check the lamp to be sure that whether is good or not.Open the cabinet door ,fix the shelf .Adhere two pieces of 2cm two-side glue on to the bottom of the mirror. All the operation must be process when the electric is turn off.